Development of a BPM System using a Commercial FPGA Card and Digitizer Adaptor Module for FETS. / Boorman, Gary; Gibson, Stephen; Jolly, Simon; D'Arcy, R.; Lawrie, Scott; Letchford, Alan.

5th International Particle Accelerator Conference: 15-20 June 2014 Dresden, Germany. 2014. p. 3716-3719 THPME186.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Published

Standard

Development of a BPM System using a Commercial FPGA Card and Digitizer Adaptor Module for FETS. / Boorman, Gary; Gibson, Stephen; Jolly, Simon; D'Arcy, R.; Lawrie, Scott; Letchford, Alan.

5th International Particle Accelerator Conference: 15-20 June 2014 Dresden, Germany. 2014. p. 3716-3719 THPME186.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Harvard

Boorman, G, Gibson, S, Jolly, S, D'Arcy, R, Lawrie, S & Letchford, A 2014, Development of a BPM System using a Commercial FPGA Card and Digitizer Adaptor Module for FETS. in 5th International Particle Accelerator Conference: 15-20 June 2014 Dresden, Germany., THPME186, pp. 3716-3719. https://doi.org/10.18429/JACoW-IPAC2014-THPME186

APA

Boorman, G., Gibson, S., Jolly, S., D'Arcy, R., Lawrie, S., & Letchford, A. (2014). Development of a BPM System using a Commercial FPGA Card and Digitizer Adaptor Module for FETS. In 5th International Particle Accelerator Conference: 15-20 June 2014 Dresden, Germany (pp. 3716-3719). [THPME186] https://doi.org/10.18429/JACoW-IPAC2014-THPME186

Vancouver

Boorman G, Gibson S, Jolly S, D'Arcy R, Lawrie S, Letchford A. Development of a BPM System using a Commercial FPGA Card and Digitizer Adaptor Module for FETS. In 5th International Particle Accelerator Conference: 15-20 June 2014 Dresden, Germany. 2014. p. 3716-3719. THPME186 https://doi.org/10.18429/JACoW-IPAC2014-THPME186

Author

Boorman, Gary ; Gibson, Stephen ; Jolly, Simon ; D'Arcy, R. ; Lawrie, Scott ; Letchford, Alan. / Development of a BPM System using a Commercial FPGA Card and Digitizer Adaptor Module for FETS. 5th International Particle Accelerator Conference: 15-20 June 2014 Dresden, Germany. 2014. pp. 3716-3719

BibTeX

@inproceedings{4c985ea94ff543079683c05f4240e9b1,
title = "Development of a BPM System using a Commercial FPGA Card and Digitizer Adaptor Module for FETS",
abstract = "A series of beam position monitors (BPMs) will be installed at the Front End Test Stand (FETS) at RAL as part of the 3 MeV Medium Energy Beam Transport (MEBT). The BPMs analyse 2 ms long, 60 mA beam pulses delivered to the MEBT by a 324 MHz Radio Frequency Quadrupole (RFQ). Initial linearity and resolution measurements from the prototype button BPMs are shown. The development of the algorithm for the processing of the BPM signals using a commercial PXI-based FPGA card is discussed and initial measurements of the electronics and signal processing are presented. The test-rig used to characterise each BPM and further develop the processing algorithm is described. The position and phase are measured several times throughout the duration of each pulse, and the measurements are made available via an EPICS server.",
author = "Gary Boorman and Stephen Gibson and Simon Jolly and R. D'Arcy and Scott Lawrie and Alan Letchford",
year = "2014",
month = jun,
day = "20",
doi = "10.18429/JACoW-IPAC2014-THPME186",
language = "English",
pages = "3716--3719",
booktitle = "5th International Particle Accelerator Conference",

}

RIS

TY - GEN

T1 - Development of a BPM System using a Commercial FPGA Card and Digitizer Adaptor Module for FETS

AU - Boorman, Gary

AU - Gibson, Stephen

AU - Jolly, Simon

AU - D'Arcy, R.

AU - Lawrie, Scott

AU - Letchford, Alan

PY - 2014/6/20

Y1 - 2014/6/20

N2 - A series of beam position monitors (BPMs) will be installed at the Front End Test Stand (FETS) at RAL as part of the 3 MeV Medium Energy Beam Transport (MEBT). The BPMs analyse 2 ms long, 60 mA beam pulses delivered to the MEBT by a 324 MHz Radio Frequency Quadrupole (RFQ). Initial linearity and resolution measurements from the prototype button BPMs are shown. The development of the algorithm for the processing of the BPM signals using a commercial PXI-based FPGA card is discussed and initial measurements of the electronics and signal processing are presented. The test-rig used to characterise each BPM and further develop the processing algorithm is described. The position and phase are measured several times throughout the duration of each pulse, and the measurements are made available via an EPICS server.

AB - A series of beam position monitors (BPMs) will be installed at the Front End Test Stand (FETS) at RAL as part of the 3 MeV Medium Energy Beam Transport (MEBT). The BPMs analyse 2 ms long, 60 mA beam pulses delivered to the MEBT by a 324 MHz Radio Frequency Quadrupole (RFQ). Initial linearity and resolution measurements from the prototype button BPMs are shown. The development of the algorithm for the processing of the BPM signals using a commercial PXI-based FPGA card is discussed and initial measurements of the electronics and signal processing are presented. The test-rig used to characterise each BPM and further develop the processing algorithm is described. The position and phase are measured several times throughout the duration of each pulse, and the measurements are made available via an EPICS server.

U2 - 10.18429/JACoW-IPAC2014-THPME186

DO - 10.18429/JACoW-IPAC2014-THPME186

M3 - Conference contribution

SP - 3716

EP - 3719

BT - 5th International Particle Accelerator Conference

ER -