Experimental results of the laserwire emittance scanner for LINAC4 at CERN. / Hofmann, Thomas; Boorman, Gary; Bosco, Alessio; Bravin, Enrico; Gibson, Stephen; Kruchinin, Konstantin; Raich, Uli; Roncarolo, Federico; Zocca, Francesca.

In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 830, 11.09.2016, p. 526-531.

Research output: Contribution to journalArticle

Published

Documents

Links

Abstract

Within the framework of the LHC Injector Upgrade (LIU), the new LINAC4 is currently being commissioned to replace the existing LINAC2 proton source at CERN. After the expected completion at the end of 2016, the LINAC4 will accelerate H− ions to 160 MeV. To measure the transverse emittance of the H− beam, a method based on photo-detachment is proposed. This system will operate using a pulsed laser with light delivered via an optical fibre and subsequently focused onto the H− beam. The laser photons have sufficient energy to detach the outer electron and create H0/e− pairs. In a downstream dipole, the created H0 particles are separated from the unstripped H− ions and their distribution is measured with a dedicated detector. By scanning the focused laser beam across the H− beam, the transverse emittance of the H− beam can be reconstructed. This paper will first discuss the concept, design and simulations of the laser emittance scanner and then present results from a prototype system used during the 12 MeV commissioning of the LINAC4.
Original languageEnglish
Pages (from-to)526-531
Number of pages6
JournalNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Volume830
Early online date16 Feb 2016
DOIs
Publication statusPublished - 11 Sep 2016
This open access research output is licenced under a Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported License.

ID: 26282653