SIMULATION OF A CAVITY BPM FOR HIGH RESOLUTION SINGLEPASS BEAM POSITION MEASUREMENTS

Alun Morgan; Gunther Rehm; Nirav Joshi; Alexey Lyapin; Stewart  Boogert; Stephen Molloy

SIMULATION OF A CAVITY BPM FOR HIGH RESOLUTION SINGLEPASS BEAM POSITION MEASUREMENTS

Alun Morgan, Gunther Rehm, Nirav Joshi, Alexey Lyapin, Stewart Boogert, Stephen Molloy

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Abstract

This paper describes the design of a cavity BPM for use in single pass machines. The design was modelled using a number of different EM codes to allow cross comparison of the simulation results. Furthermore, in addition to existing designs, the geometry has been modified to introduce a frequency separation between the horizontal and vertical dipole signals, as well as a reduction of the sensitivity of the position monitor to the monopole sum signal. The next stage of this project will be the manufacture of a prototype for tests in the transfer path at Diamond Light Source.

Original language	English
Title of host publication	Proceedings of Beam Instrumentation Workshop,2010, Santa Fe, New Mexico, USA
Publication status	Published - 2010

Access to Document

http://www.lanl.gov/conferences/biw10/preprints/TUPSM026_preprint.pdf

Cite this

@inproceedings{734dbb5e99994e94a8c918959f76891c,

title = "SIMULATION OF A CAVITY BPM FOR HIGH RESOLUTION SINGLEPASS BEAM POSITION MEASUREMENTS",

abstract = "This paper describes the design of a cavity BPM for use in single pass machines. The design was modelled using a number of different EM codes to allow cross comparison of the simulation results. Furthermore, in addition to existing designs, the geometry has been modified to introduce a frequency separation between the horizontal and vertical dipole signals, as well as a reduction of the sensitivity of the position monitor to the monopole sum signal. The next stage of this project will be the manufacture of a prototype for tests in the transfer path at Diamond Light Source.",

author = "Alun Morgan and Gunther Rehm and Nirav Joshi and Alexey Lyapin and Stewart Boogert and Stephen Molloy",

year = "2010",

language = "English",

booktitle = "Proceedings of Beam Instrumentation Workshop,2010, Santa Fe, New Mexico, USA",

}

TY - GEN

T1 - SIMULATION OF A CAVITY BPM FOR HIGH RESOLUTION SINGLEPASS BEAM POSITION MEASUREMENTS

AU - Morgan, Alun

AU - Rehm, Gunther

AU - Joshi, Nirav

AU - Lyapin, Alexey

AU - Boogert, Stewart

AU - Molloy, Stephen

PY - 2010

Y1 - 2010

N2 - This paper describes the design of a cavity BPM for use in single pass machines. The design was modelled using a number of different EM codes to allow cross comparison of the simulation results. Furthermore, in addition to existing designs, the geometry has been modified to introduce a frequency separation between the horizontal and vertical dipole signals, as well as a reduction of the sensitivity of the position monitor to the monopole sum signal. The next stage of this project will be the manufacture of a prototype for tests in the transfer path at Diamond Light Source.

AB - This paper describes the design of a cavity BPM for use in single pass machines. The design was modelled using a number of different EM codes to allow cross comparison of the simulation results. Furthermore, in addition to existing designs, the geometry has been modified to introduce a frequency separation between the horizontal and vertical dipole signals, as well as a reduction of the sensitivity of the position monitor to the monopole sum signal. The next stage of this project will be the manufacture of a prototype for tests in the transfer path at Diamond Light Source.

M3 - Conference contribution

BT - Proceedings of Beam Instrumentation Workshop,2010, Santa Fe, New Mexico, USA

ER -